TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was developed by two guys in California. They wanted to develop a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the marketplace by storm.
The Smok Pen includes a built quality that’s just great. I came across that even though it is an electronic pen the construction is just as good as any of the pens that I have reviewed. For the reason that of how they made the most notable cap. You don’t need to be worried about the cap cracking or breaking on you Smok Valve Pen.
The two biggest differences that separate the Smok Valve from other pens is the shape of the coils and just how that they are built. In general the coil on a Smok Pen is larger than on other pens. I think that they did this on purpose, to help make the pen feel bigger.
If you take a look at a Smok Pen, you will observe that the body of the pen is round and not smooth like other pens. On the trunk of the pen there is a little tab that houses the coil. When you press on the tab you can actually turn the heating element on and off. I really liked this feature since it allows me to use the Smok Pen 22 whenever Personally i think like smoking.
To use the Smok Pen it is advisable to keep carefully the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it reaches the appropriate temperature you can switch off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.
When you put your Smok Pen into the tank you will notice a indicator light come on. The indicator light will stay green unless you put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen into the charger before you apply the e-liquids to the coil heads. Additionally it is important to do that before putting your e-liquids into the coil heads.
After you have completed this step, it is best to check to see in case you are at the proper temperature for the coils to fire. If not then you should turn the power off and try again. If you are still not satisfied together with your Smok Pen i quickly suggest you take it set for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. It is suggested that you perform the following two steps, then go on and check the Smok Pen to see if it still gets the electronic charging port.
Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. After you have loosened this wire you can then access the sub-ohm. You need to then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.
Once you have placed the sub-ohm tank in to the pen you need to then place all of those other components including podsmall.com the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the energy and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you first put the pen in to the microwave the electronic reading will show a low voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has already reached the temperature that it needs to reach you should then connect both wires to the negative and positive on the positive post on the Smok unit. You should then connect another end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s power switch.
After all the components have been placed in to the pen, you should turn the power on. After the first test run, you have to be able to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a brand new one. For your convenience there is also a green light which might be pressed to be able to confirm the battery charging status. Once you have done these things and you do not see the green light indicating charging, you should replace the battery.